But now, all you need is a set of Auxbeam 6 Mode LED Strobe Light Bar! How to connect the 6 modes? Our light bar come with 10FT Wiring Harness Kit, please connect the red wire and black wire to the positive and negative poles of the switch respectively when installing, and the yellow wire needs to be connected to another switch (this switch is used to control the light conversion). The different lighting modes can be quickly switched within 1 second by on/off specific switch. As an upgrade of 6 lighting modes, we have added memory function and synchronization function.
When power is off, the light will remain in the previous light mode on the next start. When long press the mode switch on the wiring harness for more than 3 seconds, and the light will return to the first mode (white light). You can re-detect whether the line is connected, or you can directly connect the light to the positive and negative of the battery to check if it works. One or two vent holes are usually designed for heat dissipation and to prevent deformation of the lamp caused by thermal expansion and contraction, so it is normal for water vapor to be inside the light, as long as the light turns on, it will evaporate quickly. When it gets moisture, you can just turn it on several times a day to dry the light.
Light color: Amber light and white light. Number of lamp beads: 100Pcs. Life time: 50,000 hours. Off-Road vehicles-ATVs, SUV, truck, Fork lift, trains, boat. Specialized vehicles-Fire engine, police cars, rescue vehicle, Communication vehicle, military command vehicle etc.
Engineering vehicles-Excavator, dozer, road roller, bulldozer, crane and mining truck etc. The Amber white 6 mode light with m. Emory function and synchronization function.A: When power is off, the light will remain in the previous light mode on the next start. Ong press the mode switch on the wiring harness for more than 3 seconds, and the light will return to the first mode (white light). Super cool engineering beam pattern design, nice performance even in foggy days. Nice fitment, easily replaces old dull filament light. Easy installation, just plug & play. Faster on/off response time and vibration resistant.
Environmental-friendly: energy saving, no UV and IR radiation, shock-proof and anti-corrosion. Advanced circuitry and die-cast aluminum alloy heatsink designed fast and effectively extend the lifespan of the light bar to over 50,000 hours. Use EMC, without electromagnetic interference, completely isolate the electromagnetic wave from the interference of car audio and driving computer, escort for save driving.
IP68 waterproof perfect sealed with Diecast Aluminum housing and shock-proof PC lens, well working in rainy, sandy, foggy days and other harsh environment. 6 Lighting modes, 2 Beam combo, Auxbeam integrates the function of spot & flood light + warning light into one LED LIGHT BAR.And has developed SIX luminous modes. You may need to order two sets of LED bars (one spot flood light and one warning light) for your vehicle. Q: What's the difference between Auxbeam 6 mode lights and normal LED lights? Auxbeam 6 mode light bars can be used for off-road, jungle adventures. Amber lights are highly penetrating and are ideal for use as warning lights. Or LED fog lights for trucks. White light is used for LED running lights or working lights. Q: How to change the mode? With a specific on/off switch, you can quickly switch between different lighting modes in 1 second.
As an upgrade to the 6 lighting modes. We added memory and synchronization. A: When the power is off, the light will remain in the previous light mode the next time it is turned on.
B: Hold down the mode switch on the wire harness for more than 3 seconds. The light will return to the first mode (white light). Q: How to connect 6 modes? Please connect the red line and black line respectively to the positive and negative terminals of the switch. And the yellow line to another switch (this switch is used to control the optical conversion).
Q: How to deal with the water vapor in the work lamp? Usually design one or two vents are to dissipate heat, prevent tube heat expansion cold contraction deformation. So the steam inside the lamp is normal, as long as the lamp turned, it will soon evaporate.When it is damp, you can turn it on several times a day to dry the light. 1 x Car LED Work Light. Wiring Harness Kit - 1 Lead. Please be noted that, this service is more recommended for Monday-Thursday orders. Orders on Friday may be processed on following Monday by UPS, according to UPS's policy. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. We appreciate your business and strived to improve our customer service and our commitment to quality. Thank you for visiting my store! This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Accessory Lighting\Light Bars". The seller is "buyersbestchoice" and is located in this country: US. This item can be shipped to United States.