Installing the lamp, as easy as changing a bulb. Turn power OFF before installation. Energy saving of 50% from 38 watts to 19 watts with 2090 lumens output.All plastic diffuser for better light distribution, less spot reflections. Heavy duty aluminum heat sink ensures the LED run cooler for longer. Plastic and aluminum construction ensures less breakage. Long life span of > 50,000+ hours.
High lumen output > 110 lumens per watt. Available in 3000, 4200, 5000, 6000 Kelvin.
Uses 19 watts = 38 watts equivalent. 2,3 bulbs per package. Nominal length 64 T6 (1/2-1-inch diameter).
62 with pins (1574.8 mm). Single pin base type (Fa8), pin-type connector. Slimline series lamps for display case and designer show case. Technical description: T6 Single Pin F64T6. Perfect for garage, basements, warehouses and industrial buildings.Works with electronic and magnetic ballast only! Ballast operated lamp, not bypass compatible. Why Plug & Play LED?
Simplicity for installer - The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety - Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer.
No upfront cost - eliminate the need to hire a costly electrician to do modification. Energy efficient - output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. How do I cancel my order?
About New York LED Luminaries (NYLL). NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts.Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.
This item is in the category "Home & Garden\Lamps, Lighting & Ceiling Fans\Light Bulbs". The seller is "nyledluminaries" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay, Mexico.